35° 70T/M die 20.170
V Die 20.170
Die 20.170 is a bottom tool for press brakes, designed for precise sheet-metal bending using a V-type working groove. The 35° groove angle allows parts to be produced where a narrower bending geometry is required than with classic 60° or 90° dies.
The model has a groove opening of V = 12 mm, an overall height of 90 mm and a maximum load capacity of 70 tonnes per metre. The lower mounting section is 14 mm wide, while the overall base width is 24 mm.
Model 20.170 is intended for use with press brakes when stable material guidance and precise reproduction of bending geometry using a narrower groove angle are required.
Key Features of Die 20.170
A V-type bottom die is an important component of press-brake tooling. Properly selected groove angle, groove width and load capacity directly affect the accuracy, repeatability and safety of the bending process.
V Bottom Die
Bottom tool for a press brake equipped with a V-type working groove.
V12 Opening
The 12 mm wide working groove provides stable material support during bending.
35° Angle
Special 35° groove geometry for work with more closed bends.
70 t/m Load Capacity
The maximum permissible tool load is 70 tonnes per metre of length.
90 mm Height
The overall die height is 90 mm according to the attached technical drawing.
14 / 24 mm Base
The lower mounting section is 14 mm wide, and the overall base width is 24 mm.
Technical Specification of Die 20.170
| Parameter | Value |
|---|---|
| Tool Type | V bottom die / bottom tool for press brake |
| Profile Designation | 20.170 |
| Maximum Load | 70 t/m |
| Working Groove Angle | 35° |
| V-Groove Opening | 12 mm |
| Overall Height | 90 mm |
| Lower Section Width | 14 mm |
| Overall Base Width | 24 mm |