60° die, 70T/M, 20.163
V Die 20.163
Die 20.163 is a bottom tool for press brakes, designed for precise sheet-metal bending using a V-type working groove. Proper groove geometry provides stable material support and high repeatability of the bending process.
Model 20.163 is suitable for work with press brakes where repeatability, proper groove geometry and correct matching of the tool to the punch and bent material are crucial.
Key Features of Die 20.163
A V-type bottom die is a basic component of press-brake tooling. Selecting the correct working groove, angle and tool load capacity directly affects bending quality, dimensional accuracy and operational durability.
V Bottom Die
Bottom tool for a press brake with a V-type working groove.
V10 Opening
The 10 mm wide working groove enables stable material guidance during bending.
60° Angle
The groove geometry is made at a 60° angle according to the technical documentation.
70 t/m Load Capacity
The maximum permissible die load is 70 tonnes per metre of length.
90 mm Height
The overall tool height is 90 mm, matching the parameters from the technical drawing.
14 / 18 mm Base
The lower mounting width is 14 mm, and the overall base width is 18 mm.
Technical Specification of Die 20.163
| Parameter | Value |
|---|---|
| Tool Type | V bottom die / bottom tool for press brake |
| Profile Designation | 20.163 |
| Maximum Load | 70 t/m |
| Working Groove Angle | 60° |
| V-Groove Opening | 10 mm |
| Overall Height | 90 mm |
| Lower Section Width | 14 mm |
| Overall Base Width | 18 mm |