80° die 100T/M 20.411
Die 20.411
Die 20.411 is a robust bottom tool for a press brake, designed for stable material guidance during the bending process. Thanks to its large working width and heavy-duty construction, this model performs well in more demanding operations.
The model features a working angle of 80°, upper groove width of 125 mm and transition radius of R15. The overall die height is 103 mm, the side-step height is 20 mm, the lower-section width is 90 mm, and the total tool width is 154 mm.
Model 20.411 is intended for use in press brakes wherever strength, stable sheet guidance and bending-process repeatability are important.
Key Features of Die 20.411
The bottom die is a key component of press-brake tooling. Proper selection of groove geometry, transition radius, tool dimensions and permissible load has a direct impact on bending quality, tool durability and operating safety.
Bottom Die for Bending
Bottom working tool designed for use with press brakes during sheet-metal bending.
80° Working Angle
The groove geometry provides proper material support and enables repeatable bends.
R15 Radius
The R15 transition radius supports smooth material guidance in the die working zone.
125 mm Groove Width
The large upper groove width allows the tool to be used in properly selected process applications.
103 mm Height
The tall, heavy-duty profile increases tool rigidity and stability during operation.
100 t/m Load Capacity
The maximum permissible die load is 100 tonnes per metre of working length.
Technical Specification of Die 20.411
| Parameter | Value |
|---|---|
| Tool Type | Bottom die / bottom tool for press brake |
| Model | 20.411 |
| Maximum Load | 100 t/m |
| Groove Working Angle | 80° |
| Upper Groove Width | 125 mm |
| Transition Radius | R15 |
| Overall Height | 103 mm |
| Side Step Height | 20 mm |
| Lower Section Width | 90 mm |
| Overall Die Width | 154 mm |