80° die 100T/M 20.412
Die 20.412
Die 20.412 is a durable bottom tool for a press brake, designed for stable and repeatable operation during sheet-metal bending. Its robust construction and properly designed groove geometry make this model well suited to professional industrial applications.
The model features a working angle of 80°, upper groove width of 160 mm and transition radius of R10. The overall die height is 130 mm, the side-step height is 20 mm, the lower-section width is 90 mm, and the total tool width is 185 mm.
Model 20.412 was designed for use in press brakes, where tool durability, proper material support and high repeatability of the bending process are important.
Key Features of Die 20.412
The bottom die is one of the basic components of press-brake tooling. Selecting the correct working angle, transition radius, tool dimensions and permissible load has a direct impact on bending quality, operating safety and durability of the entire system.
Bottom Die for Bending
Bottom working tool designed for use with press brakes during sheet-metal processing.
80° Working Angle
The groove geometry enables proper material support and repeatable bending results.
R10 Radius
The R10 transition radius supports smooth material guidance and correct operation in the bending zone.
160 mm Groove Width
The wide working zone allows the tool to be used in properly selected process applications.
130 mm Height
The tall, robust profile increases tool rigidity and stability under load.
100 t/m Load Capacity
The maximum permissible load is 100 tonnes per metre of the die’s working length.
Technical Specification of Die 20.412
| Parameter | Value |
|---|---|
| Tool Type | Bottom die / bottom tool for press brake |
| Model | 20.412 |
| Maximum Load | 100 t/m |
| Groove Working Angle | 80° |
| Upper Groove Width | 160 mm |
| Transition Radius | R10 |
| Overall Height | 130 mm |
| Side Step Height | 20 mm |
| Lower Section Width | 90 mm |
| Overall Die Width | 185 mm |