88° 95T/M 20.140 die
V Die 20.140
Die 20.140 is a bottom tool for a press brake, equipped with a V-type groove. It is used to support the sheet during the bending process and works with the upper punch.
According to the technical drawing, the die has a groove angle of 88° and an opening of V = 6 mm. The overall tool height is 90 mm, and the base width is 14 mm.
Model 20.140 enables stable material guidance during bending and is intended for use with compatible punches in press brakes.
Key Features of Die 20.140
The description was prepared based on the attached technical drawing. The die is a bottom tool with a V-groove responsible for supporting and guiding the sheet during the bending process.
V Bottom Die
Bottom tool for a press brake with a V-shaped working groove.
V6 Opening
The groove opening width is 6 mm according to the technical drawing.
88° Angle
The working groove is made at an 88° angle, which affects the geometry of the bend being produced.
95 t/m Load Capacity
The maximum permissible tool load is 95 tonnes per metre of length.
90 mm Height
The overall die profile height is 90 mm.
14 mm Width
The tool base width is 14 mm according to the presented drawing.
Technical Specification of Die 20.140
| Parameter | Value from Drawing |
|---|---|
| Tool Type | V bottom die / bottom tool for press brake |
| Profile Designation | 20.140 |
| Maximum Load | 95 t/m |
| Working Groove Angle | 88° |
| V-Groove Opening | 6 mm |
| Overall Height | 90 mm |
| Base Width | 14 mm |