85° punch 50T/M 10.107
Punch 10.107
Punch 10.107 is an upper tool designed for work in press brakes. The punch profile enables bends at an 85° angle, with a very small tip radius of R0.25.
According to the technical drawing, the maximum tool load is 50 tonnes per metre. The punch profile has an upper width of 27 mm, an overall height of 120 mm and a working height of 90 mm.
Profile 10.107 is suitable for bending parts requiring a very small radius, stable tool guidance and a repeatable 85° working angle.
Key Features of Punch 10.107
Profil 10.107
Tool profile designation according to the technical drawing: 10.107.
50 t/m Load Capacity
The maximum permissible tool load is 50 tonnes per metre.
85° Angle
The punch tip geometry enables material bending at an 85° angle.
R0.25 Radius
The working tip with an R0.25 radius allows a very small bending radius of the part.
120 mm Height
The overall profile height is 120 mm according to the technical drawing.
90 mm Working Height
The important working dimension of the profile is 90 mm and may be important when selecting the tool.
Technical Specification of Punch 10.107
| Parameter | Value from Drawing |
|---|---|
| Tool Type | Punch / upper tool for press brake |
| Profile Designation | 10.107 |
| Maximum Load | 50 t/m |
| Working Angle | 85° |
| Tip Radius | R0,25 |
| Upper Profile Section Width | 27 mm |
| Overall Profile Height | 120 mm |
| Working Height from Drawing | 90 mm |
| Internal Dimension / Offset | 15 mm |
| Side Dimension | 3 mm |
| Tip-Side Dimension | 6 mm |
| Additional Profile Dimension | 5 mm |